Automotive
Low-profile trolley jack
A long-reach service jack that slides under lowered cars and lifts quickly to working height.
- Capacity
- 2–5 t
- Lowest height
- 75–90 mm
- Highest lift
- 450–580 mm
Hydraulic & air-hydraulic lifting
Lifting equipment rated for daily professional use.
Hand-operated hydraulic tools for precise, controlled lifts, and air-hydraulic units that run from your workshop air line for speed and less operator effort.
Lifting · Automotive
Automotive
For passenger car, SUV and light commercial workshops, tyre centres and dealerships.
Automotive
Folding engine crane
A workshop crane with an extending boom for removing and refitting engines and gearboxes.
- Capacity
- 1–2 t
- Hook height
- up to 2.5 m
- Storage
- folds upright
Automotive
Hydraulic workshop press
An H-frame press for bearings, bushings and straightening work, with manual or air-hydraulic drive.
- Force
- 10–50 t
- Working width
- 500–900 mm
- Drive
- manual / air
Full automotive range
| Equipment | Drive | Typical capacity |
|---|---|---|
| Low-profile trolley jacks | Hydraulic / air-hydraulic | 2–5 t |
| Bottle jacks | Hydraulic | 2–30 t |
| Axle stands | Mechanical | 3–12 t |
| Transmission & gearbox jacks | Hydraulic | 0.5–1.5 t |
| Folding engine cranes | Hydraulic | 1–2 t |
| Workshop presses | Hydraulic / air-hydraulic | 10–50 t |
Lifting · Heavy-duty vehicles
Heavy-duty vehicles
For truck, bus, trailer and agricultural fleet workshops where lifts are heavy and frequent.
Heavy-duty vehicles
Telescopic air-hydraulic axle jack
A two- or three-stage jack that runs from the workshop air line to raise a full axle in seconds.
- Capacity
- 20–100 t
- Lowest height
- 150–250 mm
- Air supply
- 8–12 bar
Heavy-duty vehicles
Pit jack
A jack that rolls along the pit rails to lift axles for brake, suspension and wheel work from below.
- Capacity
- 5–20 t
- Drive
- air-hydraulic
- Pit width
- 700–1,100 mm
Heavy-duty vehicles
Truck transmission jack
A tall telescopic jack with a tilting saddle for lowering and aligning heavy gearboxes.
- Capacity
- 1–2 t
- Lift height
- 1.1–1.9 m
- Saddle tilt
- ±10°
Full heavy-duty vehicles range
| Equipment | Drive | Typical capacity |
|---|---|---|
| Air-hydraulic axle jacks (telescopic) | Air-hydraulic | 20–100 t |
| Pit jacks | Hydraulic / air-hydraulic | 5–20 t |
| Heavy trolley jacks | Hydraulic / air-hydraulic | 10–30 t |
| Heavy-duty axle stands | Mechanical | 12–30 t |
| Wheel & tyre dollies | Hydraulic | 0.7–1.5 t |
| Truck transmission jacks | Hydraulic / air-hydraulic | 1–2 t |
Lifting · Industrial
Industrial
For plant maintenance, machinery moving, rigging and fabrication shops.
Industrial
Cylinder and pump set
A single-acting cylinder with a hand or air-driven pump, hose and gauge for controlled lifting and pressing.
- Capacity
- 5–200 t
- Working pressure
- 700 bar
- Stroke
- 15–300 mm
Industrial
Hydraulic toe jack
A jack with a low lifting toe for raising machinery that sits close to the floor.
- Toe capacity
- 5–25 t
- Toe height
- 15–30 mm
- Head capacity
- up to 50 t
Industrial
Industrial bottle jack
A compact, high-capacity jack for packing, levelling and general lifting jobs around the plant.
- Capacity
- 2–50 t
- Lowest height
- 180–300 mm
- Drive
- manual / air
Full industrial range
| Equipment | Drive | Typical capacity |
|---|---|---|
| Single & double-acting cylinders | Hydraulic | 5–200 t |
| Low-height & flat cylinders | Hydraulic | 5–100 t |
| Hand, foot & air-driven pumps | Hydraulic / air-hydraulic | up to 700 bar |
| Toe jacks | Hydraulic | 5–25 t |
| Machine skates & lifting wedges | Mechanical / hydraulic | 3–60 t |
| Hoses, gauges & couplers | Accessories | matched to system |
Lifting · Mining
Mining
For haul truck, loader and support-fleet maintenance in open-pit and underground operations.
Mining
High-tonnage air-hydraulic jack
A heavy wheeled jack for lifting haul trucks and loaders during tyre changes and field service.
- Capacity
- 50–150 t
- Lowest height
- 250–400 mm
- Air supply
- 8–12 bar
Mining
Heavy-duty load stands
Adjustable stands with mechanical locking that hold large machines safely once they are lifted.
- Capacity
- 30–150 t each
- Height
- 0.6–1.5 m
- Locking
- mechanical
Mining
Heavy wheel dolly
A low hydraulic dolly for removing, moving and refitting large earthmover and truck wheels.
- Capacity
- up to 5 t
- Tyre diameter
- up to 3 m
- Drive
- hydraulic
Full mining range
| Equipment | Drive | Typical capacity |
|---|---|---|
| High-tonnage air-hydraulic jacks | Air-hydraulic | 50–200 t |
| Haul truck & loader lifting cylinders | Hydraulic | 50–200 t |
| Suspension strut service tools | Hydraulic | by application |
| Heavy wheel & tyre handlers | Hydraulic | up to 5 t |
| Heavy-duty load stands | Mechanical | 30–150 t |
| Field-service pump sets | Air-hydraulic | up to 700 bar |
Built for workshops
We specify steel-bodied units with overload protection and safety valves for daily professional use.
Air or manual
Choose air-hydraulic units for speed in busy bays, or manual hydraulics where air is not available.
Documented supply
Equipment ships with operating manuals and documentation. Tell us which lifting standard your site follows.
Need to lift something specific?
Tell us the vehicle or load and we will confirm the right capacity and drive.